• +91 20 24227182
  • +91 20 24227182

Clean-Sweep sprockets


Clean-Sweep Sprockets

Deflect buildup and lengthen life

Wire Belt's innovative line of Clean-Sweep™ sprockets are specifically designed to deflect the amount of product buildup accumulated on your conveyor’s drive. This means that there is less of a chance for product loss & carryout, belt skipping due to product buildup, and belt breakage due to incorrect contact with the sprocket teeth. Clean-Sweep™ sprocket’s tooth chamfer is machined to reduce drive friction and can lengthen belt life.

Download PDF         


Clean-Sweep Sprockets Advantages


  • Deflects product buildup at the drive
  • Engineered specifically for use with Wire Belt’s Versa-Link™ and Flat-Flex® conveyor belts
  • Lowers product carryout
  • Sprocket tooth chamfer reduces drive friction - lessening belt wear
  • Easy-to-clean in place design
  • Eliminates belt skipping due to product buildup
  • Available in stainless steel or PEEK materials
  • Direct replacement for any of our standard sprockets



PEEK Typical Properties


  Units PEEK
Tensile strength MPa
psi 14,500
Heat deflection temperature @ 1.82 MPa (264 psi)  ºC 152
Maximum continuous service temperature in air ºC 240
Minimum continuous service temperature in air ºC -50
Melting point ºC 343